Before
After
Pickup available at 10 Longstaff Road
Usually ready in 4 hours
Toyota XA60 RAV4 GX/ GXL/ XSE CRUISER 2026-Current - OEM Plinth Delete Kit (FRONT)
Short (Suits Small Plates)
10 Longstaff Road
10 Longstaff Road
Bayswater VIC 3153
Australia
AVAILABLE FOR ORDER NOW - PLEASE PAIR WITH A MATCHING PLATE BRACKET TO CHECKOUT
Toyota XA60 RAV4 GX/ GXL/ XSE CRUISER 2026-Current - OEM Plinth Delete Kit (FRONT)
The Toyota XA60 RAV4 GR SPORT comes fitted with a large factory front number plate plinth that adds unnecessary bulk to the front bumper and takes away from the CRUISER’s sharp, aggressive styling. Our OEM Plinth Delete Kit replaces the oversized factory mount with a cleaner, more proportional solution designed to suit Australian number plates.
The plinth mounts directly to the front bumper using the existing factory mounting points left behind after removing the original Toyota plate mount. Simply remove the factory plinth, position the Flow Brackets replacement plinth, and secure it using the supplied hardware.
Once installed, pair the plinth with the correct Flow Brackets number plate mount to suit your plate style, including slimline, heritage, euro, or standard. The result is a centred, floating plate finish that eliminates the bulky factory plinth while maintaining the clean and aggressive styling of the RAV4 Cruiser.
This setup provides a simple OEM-style upgrade with no unnecessary drilling, giving the XA60 RAV4 GX/ GXL/ XSE CRUISER a much cleaner and more refined front-end finish.
NOTE: THIS IS A TWO PART MOUNTING SYSTEM
Please email us at brackets@flowdesignsaustralia.com if you need help finding a matching number plate bracket to complete your 2 part mounting solution.
Kit Includes
Rear Mounting on the RAV4 Cruiser
Simply get the correct bracket to fit your number plate to mount easily, see the install video on our YouTube which goes over the rear install.
Plate Mounting Reimagined
To achieve the cleanest and most refined look for your car, the first step is removing the oversized factory mounting box — the one that most enthusiasts agree takes away from the overall appearance of the front end. We've addressed this with our newly redesigned Plinth, which replaces that bulky setup with a smaller, more streamlined mounting point. This not only enhances the aesthetic by giving your number plate a floating, minimalist look, but also better complements the lines and details of your vehicle's front fascia.
Our main priority throughout this process is to preserve the integrity of your vehicle by avoiding any unnecessary or highly visible drill holes. Wherever possible, we limit modifications to only what’s essential for a clean and secure install. The result is a subtle yet high-impact upgrade that respects the original design of your car while elevating its visual appeal.
Overall rating: 4.8 / 5 from 868 reviews.
Good company to deal with. Their bracket was the only one I could find that actually suited a front number plate for a Ferrari 488. Other brackets don’t look good on a 488. So thank goodness I found this one, which they shipped to the UK.
Ferrari F142 488 GTB/ Spider 2015-2019 - Drill Free Plinth Mounting Kit (FRONT)
Absolut great product eliminating the massive factory plinth, fits perfectly and looks amazing. Thank you so much for shipping to Germany
![Customer photo review of [VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)](http://images.loox.io/uploads/2026/6/17/QbQdwZMcP_mid.jpg)
Super easy to fit and more secure than “custom plates” mounting bracket, made from aluminium kit came with all the fasteners required,
[VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/lWAoBEJ5D_mid.jpg)
Nice quality and fits perfectly. Only when closing the boot it seems to slam against the paint, making a rattling sound which is the only negative thing. Or did I miss something? Thanks
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/w-2Aqi7AX_mid.jpg)
They are very good bracket. Very nice, slim and blend together with my car. Awesome look!
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
Great product and super high quality - has everything you need. Looks so much better now.
Fits perfectly. 👌🏾
Very responsive to questions, great quality product and no need to drill holes in the car!
Porsche 992.1 911 Carrera Coupe (GTS / 4 GTS) - Miniature Plinth (FRONT)
![Customer photo review of [VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)](http://images.loox.io/uploads/2026/10/6/wn5o2XU0b_mid.jpg)
Really cleaned up the front end, super easy to install. Thank you Mr Flow Brackets 😛
[VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/10/5/TboU9rzj6_mid.jpg)
The bracket and mount works exactly as it should, I supplied it to the dealer before delivery so the car looks very tidy
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [QLD] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/10/7/CW7MuvtOhD_mid.jpg)
Excellent quality and looks amazing 👏
[QLD] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [QLD] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/10/2/ZHFOuCyiu_mid.jpg)
Great product
[QLD] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/10/1/gwVykk_dI_mid.jpg)
Very well fabricated product. Looks fabulous. Comprehensive instructions covering all options. A1.
[WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
The plate cover doesn’t fit . Wrong one . I have to throw it in bin
The perfect fit, this eliminated the plastic number plate plinth, allowing me to mount a Euro Slim black plate flush to the grill.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Great product and excellent customer service. There was a misunderstanding with my order, but Benjamin at Flow Brackets listened to my concerns and came up with a fair solution that left us both happy with the outcome. Very pleased with how everything was handled and I'd happily recommend Flow Brackets to others. 👍
KINGPIN NSW/SA Slimline Rear Number Plate Cover 372mm (w) x 107mm (h)
![Customer photo review of [QLD] Euro Slimline SL2- Number Plate Bracket](http://images.loox.io/uploads/2026/9/29/FHWo7S9jP_mid.jpg)
Fits perfectly and just finishes the new look on the Euro slimline plates.
I love the front delete plinth! It fits like a glove, was super easy to install, and looks great. Would definitely recommend it!
Bentley Bentayga 4V FL 2021-Current - OEM Plinth Delete Kit (FRONT)
The ordering and shipping were without a hitch. Every thing that I ordered arrived in quick time and I live in a regional North Queensland town. The installation was a breeze and the products speak for themselves - it looks amazing. My local Lexus dealer was very impressed and said it looks much better without the factory plinth!
Lexus NX350H/ 450H F-SPORT 2021-Current - Miniature Plinth (FRONT)
Really well made and fitted perfectly. Way better than the ugly factory item that the dealer has already installed. Sent them the photo and recommended they offer these to future Mustang buyers.
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/27/bTx4LhUai_mid.jpg)
Really well made, I’ve recommended it to the dealer.
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/22/PjjI3GtIi_mid.jpg)
Didn't want to drill holes in a personalised plate and I wasn't sure I would find the right bracket. With Ben's guidance, decided to give it a try and how was really surprised how easy it was! Mounting bracket on original mounts then screw the plate on and voila!
[NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket
Absolutely blown away by these! 🤩 My Flow Brackets number plate brackets arrived beautifully packaged in a gorgeous box, with the brackets safely secured in foam. You can immediately see the care and attention to detail that’s gone into the whole experience. The instructions were so easy to follow, with every detail clearly covered. And the fit… “fits like a glove” doesn’t even do them justice! 👌 They fit absolutely perfectly and have completely transformed the look of my plates. They now look like they were born with the car rather than added afterwards. 🔥 And I have to mention the fantastic communication. It was so personalised, friendly and genuinely top-notch from start to finish. You don’t always get that level of care these days, and it really stood out. Amazing product, amazing presentation, perfect fit and exceptional customer service. Couldn’t be happier! ❤️🔥 Highly recommend Flow Brackets — they absolutely nailed it!
Mercedes C-Class Pre-Facelift 2014-2017 AMG Line W205 / C205 - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)](http://images.loox.io/uploads/2026/9/18/MchZqjQnI_mid.jpg)
I had been searching high and low across the UK for a factory thick bracket delete kit for my specific model, and it was virtually impossible to find anywhere. Every local vendor and specialist shop came up completely empty. No one makes this specific product for my vehicle let alone at a price point that makes sense. Stumbling upon Flow Bracket over in Australia was a complete game changer. Finding a company on the other side of the world producing the exact niche solution I needed felt too good to be true. The whole transaction took place seamlessly over Instagram DMs and email. The team’s responsive service was second to none. They answered my questions right away, handled the international ordering details effortlessly, and made dealing with an overseas business feel completely effortless. Even with the distance, delivery to the UK took just a single week! The packaging was fantastic super secure, heavily protected, and arrived in pristine condition despite traveling halfway around the globe. When it comes to the product itself, the engineering quality is top tier. The sheer build strength and precision fitment are clearly the core of their USP. Thanks to how well engineered the kit is, I was able to cut the install time short and keep the fitting process surprisingly simple. It bolted straight up with zero fuss and completely transformed the setup. Flow Bracket is running a serious operation down in Australia. Finding this level of custom product support, lightning fast turnaround, and genuine product quality is rare. You guys genuinely need to push into and sell to the UK market even more because the car community over here needs this gear. Massive thanks to the team absolutely top notch work! Many Thanks from CT @Team_Roto
[QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)
Looks great once installed. Super clean with numberplate cover. One very minor issue worth noting - I think my kit came with a pair of flat edge thread-cutting screws instead of the two pointed self-tapping screws as indicated in the manual. It made screwing the plinth delete plate quite a pain as I had to use a lot of force to catch the thread. Had to screw it in at an angle. All good once in. Could have been just my kit but perhaps worth checking the supplier has included the correct self tapping screws in this particular GR kit. Customer service was great.
![Customer photo review of [VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)](http://images.loox.io/uploads/2026/9/16/BYzGKP2Pp_mid.jpg)
Excellent fit. Enhanced the overall look of the roadster. Saved my paintwork! Happy 😊
[VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)
Easy to fit and looks the part.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Na
![Customer photo review of [NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/15/KXChWDdDm_mid.jpg)
Na
[NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/14/CuSworr1z_mid.jpg)
Ready and easy to fit, tidy up front of vehicle and got rid of factory holder which was rattling anyway
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/13/W5WyvRlbn_mid.jpg)
Looks great fitted well
[VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/12/p8MIN7GWe_mid.jpg)
Great communication fast delivery 1st class packaging & presentation
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
Didn’t think it was going to fit but it turned out fitting just right! I’m happy 🙂
KINGPIN NSW/SA Slimline Front Number Plate Cover 371-372mm (w) x 84mm (h)
Looks good. 👍🏼
Mercedes AMG GT63 Coupe C192 2024-Current - OEM Plinth Delete Kit (FRONT)
Great system to minimise the generic plastic plinth. Looks great. Easy to install. Quality precision parts. Quick postage and great packaging
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Makes my Mustang look mean and clean
Excellent product. Fit exactly right. Highly recommended
Easy to install and nicely fit. My front grill nice and fully showing now.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/30/ImcxOJ38X_mid.jpg)
A premium price, but an excellent quality product and supporting information overall. I did an OEM plinth delete and slimline plate install on my Mustang and a slimline plate install on my Raptor, which by design deletes the Ford OEM plinth. The kit comes with everything required for a seamless install and has dramatically changed the appearance of my cars. Highly recommended.
[WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [VIC] USA Plate - Number Plate Bracket](http://images.loox.io/uploads/2026/8/27/Mu3Zeq26n_mid.jpg)
Very simple I stall and everything fitting very easily. Makes my ride look really cool now after removing the awful factory fitted brackets.
