Pickup available at 10 Longstaff Road
Usually ready in 4 hours
Ford S650 Mustang Dark Horse 2024
Short (Virgin Bumpers)
10 Longstaff Road
10 Longstaff Road
Bayswater VIC 3153
Australia
THIS ITEM DOES NOT FIT THE MUSTANG GT ONLY DARKHORSE, FOR GT PLINTH PLEASE SEE HERE: Ford S650 Mustang GT 2024
Short: The Short plinth is designed for VIRGIN bumpers, this means bumpers with no pre-existing holes that allows you to drill two new holes closer together for a cleaner more seamless look.
Large: The Large plinth is designed for bumpers with already drilled holes from dealership, this plinth screws directly into these pre existing holes without the need to drill more. Downside is the larger form factor, so if you are using smaller plates this may not be suited.
See these top two videos for Install instructions and explanation.
Ford S650 Mustang Dark Horse 2024 - OEM Plinth Delete Kit (FRONT)
SHORT & LARGE VERSION
We successfully tackled an issue for all new Dark Horse customers receiving there cars. By redesigning the factory-issue number plate holder, we've created a specialized bracket system that perfectly accommodates Australian number plates.
Our minimalist design offers seamless adaptation to any of our number plate brackets. Our primary objective is to
MAKE SURE TO TELL YOUR DEALER NOT TO DRILL/ INSTALL THE OEM MOUNTING BOX
Rear Plate Mounting Information:
A Secondary Bracket to suit your Plate type is advised to use on the rear. Given the location of the two OEM mounting holes being central on the boot the only way to mount your plate without a Bracket would be, A: Drilling holes into the center of your plate to line it up/ Have the plate hanging from the middle leaving it touching your paint and looking off, B: Drill holes into your boot above the OEM holes for your plate to sit central.
With a our bracket you will be able to easily screw it on to the OEM Holes, without the need to drill and line it up center to your boot without the plate touching the paint. For further information on Rear Plate Mounting please contact us.
NOTE: THIS IS A TWO PART MOUNTING SYSTEM
Please email us at brackets@flowdesignsaustralia.com if you need help finding a matching number plate bracket to complete your 2 part mounting solution.
Kit Includes
Plate Mounting Reimagined
To achieve the cleanest and most refined look for your car, the first step is removing the oversized factory mounting box — the one that most enthusiasts agree takes away from the overall appearance of the front end. We've addressed this with our newly redesigned Plinth, which replaces that bulky setup with a smaller, more streamlined mounting point. This not only enhances the aesthetic by giving your number plate a floating, minimalist look, but also better complements the lines and details of your vehicle's front fascia.
Our main priority throughout this process is to preserve the integrity of your vehicle by avoiding any unnecessary or highly visible drill holes. Wherever possible, we limit modifications to only what’s essential for a clean and secure install. The result is a subtle yet high-impact upgrade that respects the original design of your car while elevating its visual appeal.
Overall rating: 4.9 / 5 from 813 reviews.
Good company to deal with. Their bracket was the only one I could find that actually suited a front number plate for a Ferrari 488. Other brackets don’t look good on a 488. So thank goodness I found this one, which they shipped to the UK.
Ferrari F142 488 GTB/ Spider 2015-2019 - Drill Free Plinth Mounting Kit (FRONT)
Absolut great product eliminating the massive factory plinth, fits perfectly and looks amazing. Thank you so much for shipping to Germany
![Customer photo review of [VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)](http://images.loox.io/uploads/2026/6/17/QbQdwZMcP_mid.jpg)
Super easy to fit and more secure than “custom plates” mounting bracket, made from aluminium kit came with all the fasteners required,
[VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/lWAoBEJ5D_mid.jpg)
Nice quality and fits perfectly. Only when closing the boot it seems to slam against the paint, making a rattling sound which is the only negative thing. Or did I miss something? Thanks
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/w-2Aqi7AX_mid.jpg)
They are very good bracket. Very nice, slim and blend together with my car. Awesome look!
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
Great product and super high quality - has everything you need. Looks so much better now.
Fits perfectly. 👌🏾
![Customer photo review of [QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)](http://images.loox.io/uploads/2026/9/18/MchZqjQnI_mid.jpg)
I had been searching high and low across the UK for a factory thick bracket delete kit for my specific model, and it was virtually impossible to find anywhere. Every local vendor and specialist shop came up completely empty. No one makes this specific product for my vehicle let alone at a price point that makes sense. Stumbling upon Flow Bracket over in Australia was a complete game changer. Finding a company on the other side of the world producing the exact niche solution I needed felt too good to be true. The whole transaction took place seamlessly over Instagram DMs and email. The team’s responsive service was second to none. They answered my questions right away, handled the international ordering details effortlessly, and made dealing with an overseas business feel completely effortless. Even with the distance, delivery to the UK took just a single week! The packaging was fantastic super secure, heavily protected, and arrived in pristine condition despite traveling halfway around the globe. When it comes to the product itself, the engineering quality is top tier. The sheer build strength and precision fitment are clearly the core of their USP. Thanks to how well engineered the kit is, I was able to cut the install time short and keep the fitting process surprisingly simple. It bolted straight up with zero fuss and completely transformed the setup. Flow Bracket is running a serious operation down in Australia. Finding this level of custom product support, lightning fast turnaround, and genuine product quality is rare. You guys genuinely need to push into and sell to the UK market even more because the car community over here needs this gear. Massive thanks to the team absolutely top notch work! Many Thanks from CT @Team_Roto
[QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)
Looks great once installed. Super clean with numberplate cover. One very minor issue worth noting - I think my kit came with a pair of flat edge thread-cutting screws instead of the two pointed self-tapping screws as indicated in the manual. It made screwing the plinth delete plate quite a pain as I had to use a lot of force to catch the thread. Had to screw it in at an angle. All good once in. Could have been just my kit but perhaps worth checking the supplier has included the correct self tapping screws in this particular GR kit. Customer service was great.
![Customer photo review of [VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)](http://images.loox.io/uploads/2026/9/16/BYzGKP2Pp_mid.jpg)
Excellent fit. Enhanced the overall look of the roadster. Saved my paintwork! Happy 😊
[VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)
Easy to fit and looks the part.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/14/CuSworr1z_mid.jpg)
Ready and easy to fit, tidy up front of vehicle and got rid of factory holder which was rattling anyway
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/13/W5WyvRlbn_mid.jpg)
Looks great fitted well
[VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/12/p8MIN7GWe_mid.jpg)
Great communication fast delivery 1st class packaging & presentation
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
Didn’t think it was going to fit but it turned out fitting just right! I’m happy 🙂
KINGPIN NSW/SA Slimline Front Number Plate Cover 371-372mm (w) x 84mm (h)
Looks good. 👍🏼
Mercedes AMG GT63 Coupe C192 2024-Current - OEM Plinth Delete Kit (FRONT)
Great system to minimise the generic plastic plinth. Looks great. Easy to install. Quality precision parts. Quick postage and great packaging
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Makes my Mustang look mean and clean
Excellent product. Fit exactly right. Highly recommended
Easy to install and nicely fit. My front grill nice and fully showing now.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/30/ImcxOJ38X_mid.jpg)
A premium price, but an excellent quality product and supporting information overall. I did an OEM plinth delete and slimline plate install on my Mustang and a slimline plate install on my Raptor, which by design deletes the Ford OEM plinth. The kit comes with everything required for a seamless install and has dramatically changed the appearance of my cars. Highly recommended.
[WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [VIC] USA Plate - Number Plate Bracket](http://images.loox.io/uploads/2026/8/27/Mu3Zeq26n_mid.jpg)
Very simple I stall and everything fitting very easily. Makes my ride look really cool now after removing the awful factory fitted brackets.
Looks great
Lexus IS 300/ 300H/ 350/ 500 F-SPORT GEN 3 2020-2025 - Miniature Plinth (FRONT)
Made a huge difference, now the plate sits correctly, expensive but worth it
![Customer photo review of [NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/24/BkZc_CqRG_mid.jpg)
Floating bracket looks awesome. Highly recommend
[NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket
![Customer photo review of [NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/24/0J9NA_c1O_mid.jpg)
Excellent fit. Highly recommend
[NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket
Great customer service and support especially with my tailored requirements needing the items shipped to UAE
Mercedes CLE 53 AMG C236/A236 2025 - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [QLD] Flexi Slimline SL2 - 5-7 Characters - 372mm (w) x 100mm (h)](http://images.loox.io/uploads/2026/8/11/DD5HeoAp0_mid.jpg)
Looks great and very easy to install
[QLD] Flexi Slimline SL2 - 5-7 Characters - 372mm (w) x 100mm (h)
Easy to install finishes of the car makes it look great
![Customer photo review of [VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/13/KnF9VtFff6_mid.jpg)
Easy to fit and looks good
[VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/8/11/cuUMIo2q3_mid.jpg)
Easy to install with very easy to read instructions and video links as well, excellent quality product, that looks really good with my euro plates. Thank you ☺️
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
Easy to navigate website, premium product and was delivered in 4 days. 👌👍🏻🤙🏼
Hyundai i30N CN7 Facelift Sedan 2023+ - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/8/6/JyjpDOUMs_mid.jpg)
Quality CNC made product. Excellent communication to all my pre-purchase questions. Looks great. Bought the front plinth and bracket. Awesome experience overall. Highly recommend.
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
![Customer photo review of [NSW] Front SL1 Euro Slim Front - Number Plate Bracket 372mm(w) X 84mm(h)](http://images.loox.io/uploads/2026/8/6/QpS93SR8-c_mid.jpg)
Great product. Highly recommend the product. Quality built CNC bracket. Great communication to all my questions. Bought the plinth too and rear bracket. Support a good Aussie company.
[NSW] Front SL1 Euro Slim Front - Number Plate Bracket 372mm(w) X 84mm(h)
Great products made by an Aussie company. Got rid of that massive plinth and now my plate just floats on my grill. Awesome CNC bracket too. Easy to install. Great communication from the Director Ben himself. Stepped me through it and install questions. Highly recommend the product and the company. Bought the rear bracket too. Wouldn’t hesitate to buy from them again.
Lexus IS 300/ 300H/ 350/ 500 F-SPORT GEN 3 2020-2025 - Miniature Plinth (FRONT)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/7/28/GNXqUAHVv_mid.jpg)
Exactly what I was looking for. The plinth for the 2026 Polestar 4 fit perfectly. I got the premium European mount and secure black screws and the whole thing turned out great. It was easy to install as well. Thank you, Mark.
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
This is the best alternative to the other options out there for a no drill front plate mounting solution!
Porsche 992.2 911 GT3 / GT3 Touring - Miniature Plinth (FRONT)
![Customer photo review of [USA] US1 Standard Issue - 12" (w) x 6" (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/7/28/MuCRBUUpw_mid.jpg)
Exactly what I was looking for to mount my NA front plate!
[USA] US1 Standard Issue - 12" (w) x 6" (h) - Number Plate Bracket
![Customer photo review of [NSW] Front or Rear Slimline 372mm (w) x 84 or 372mm (w) x 107mm (h)- Number Plate Bracket](http://images.loox.io/uploads/2026/7/26/fhQX4sj6S_mid.jpg)
Worked well with the correct mounting plinth. I think the mounting screws are a bit long. I was worried I would screw into the front guard. Used the spacers which relieved my anxieties a little.
[NSW] Front or Rear Slimline 372mm (w) x 84 or 372mm (w) x 107mm (h)- Number Plate Bracket
Worked beautifully was pretty straight forward although the written instructions were a bit of a brain strain. I used the video on your website for the screwless installation which worked great.
Porsche 992.2 911 GT3 / GT3 Touring - Miniature Plinth (FRONT)
