Pickup available at 10 Longstaff Road
Usually ready in 4 hours
Ferrari F136 F430 2005-2009 - Drill Free Plinth Mounting Kit (FRONT)
Small (Suits <2 Digit)
10 Longstaff Road
10 Longstaff Road
Bayswater VIC 3153
Australia
Ferrari F136 F430 2005-2009 - Drill Free Plinth Mounting Kit (FRONT)
The Ferrari F430 was never designed with modern number plate fitment in mind. There are no factory mounting holes, and drilling into a car of this calibre is not something most owners are willing to do.
Our Ferrari F430 mounting system provides a true no drill solution for both the front and rear of the vehicle. Using automotive grade tape combined with adhesion promoter, the plinth bonds securely to the bumper without permanent modification. The result is a strong and reliable mounting base that preserves the originality of the car.
To ensure precise positioning, each kit includes a purpose built alignment template. The template is shaped specifically to the contours of the F430 bumper, allowing the plinth to self locate and sit perfectly straight on the first attempt. Once positioned, the plinth creates a stable foundation for our interchangeable bracket system.
The F430 plinth is available in two sizes to suit different plate formats.
The Small size is designed for very compact plates such as two digit Heritage and Traditional black plates, where minimal visible backing is preferred.
The Regular size is slightly larger and is designed to accommodate four digit plates and above, including most standard Australian formats.
This is a two part mounting solution. The plinth is vehicle specific, while the bracket is selected to match your number plate style. Whether you are running Victorian slimline plates, New South Wales three to four character plates, heritage plates, or other standard formats, there is a matching bracket available.
The rear system follows the same philosophy. A dedicated mounting plate bonds securely to the bumper using the supplied template for accurate alignment. Once installed, brackets can be swapped and reused over time without disturbing the bonded base, allowing flexibility for future plate changes.
Short hardware is supplied to prevent contact with paintwork, and the bracket system allows adjustable height positioning for a balanced and centred finish.
For larger and heavier plates, optional drill provisions are available if additional mechanical fixing is required. For most standard and slimline plates, the tape and primer system provides a secure and clean installation.
This system allows you to mount number plates on a Ferrari F430 without compromising the bodywork, delivering a clean floating appearance while protecting the integrity of the car.
✅ Easy DIY Design
✅ Self Locating
✅ Zero Guess Work
✅ Designed to Hug Every Curve
✅ No Measuring Required
✅ Consistent, Repeatable Fit
✅ Drill-Free Solution
✅ Modular design to suit all Australian number plates
✅ Multiple Mounting Points
✅ Pre-Applied 3M VHB Tape (Ultra-Strong)
✅ Includes 3M Adhesion Primer for Maximum Strength
✅ Compact Profile that Doesn't Obstruct Grill
✅ Clean, Floating Plate Look
✅ Optimised Mounting Angle for Visibility & Aesthetics
NOTE: THIS IS A TWO PART MOUNTING SYSTEM
Please email us at brackets@flowdesignsaustralia.com if you need help finding a matching number plate bracket to complete your 2 part mounting solution.
Kit Includes
Install Instructions (Small) (PDF)
Install Instructions (Regular) (PDF)
Plate Mounting Reimagined
To achieve the cleanest and most refined look for your car, the first step is removing the oversized factory mounting box — the one that most enthusiasts agree takes away from the overall appearance of the front end. We've addressed this with our newly redesigned Plinth, which replaces that bulky setup with a smaller, more streamlined mounting point. This not only enhances the aesthetic by giving your number plate a floating, minimalist look, but also better complements the lines and details of your vehicle's front fascia.
Our main priority throughout this process is to preserve the integrity of your vehicle by avoiding any unnecessary or highly visible drill holes. Wherever possible, we limit modifications to only what’s essential for a clean and secure install. The result is a subtle yet high-impact upgrade that respects the original design of your car while elevating its visual appeal.
Overall rating: 4.8 / 5 from 850 reviews.
Good company to deal with. Their bracket was the only one I could find that actually suited a front number plate for a Ferrari 488. Other brackets don’t look good on a 488. So thank goodness I found this one, which they shipped to the UK.
Ferrari F142 488 GTB/ Spider 2015-2019 - Drill Free Plinth Mounting Kit (FRONT)
Absolut great product eliminating the massive factory plinth, fits perfectly and looks amazing. Thank you so much for shipping to Germany
![Customer photo review of [VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)](http://images.loox.io/uploads/2026/6/17/QbQdwZMcP_mid.jpg)
Super easy to fit and more secure than “custom plates” mounting bracket, made from aluminium kit came with all the fasteners required,
[VIC] S4 Slimline - Signature Number Plate Bracket - 255mm (w) x 105mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/lWAoBEJ5D_mid.jpg)
Nice quality and fits perfectly. Only when closing the boot it seems to slam against the paint, making a rattling sound which is the only negative thing. Or did I miss something? Thanks
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
![Customer photo review of [ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)](http://images.loox.io/uploads/2026/6/18/w-2Aqi7AX_mid.jpg)
They are very good bracket. Very nice, slim and blend together with my car. Awesome look!
[ALL STATES] Euro Premium - Number Plate Bracket 520mm (w) x 110mm (h)
Great product and super high quality - has everything you need. Looks so much better now.
Fits perfectly. 👌🏾
![Customer photo review of [WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/10/1/gwVykk_dI_mid.jpg)
Very well fabricated product. Looks fabulous. Comprehensive instructions covering all options. A1.
[WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
The plate cover doesn’t fit . Wrong one . I have to throw it in bin
The perfect fit, this eliminated the plastic number plate plinth, allowing me to mount a Euro Slim black plate flush to the grill.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Great product and excellent customer service. There was a misunderstanding with my order, but Benjamin at Flow Brackets listened to my concerns and came up with a fair solution that left us both happy with the outcome. Very pleased with how everything was handled and I'd happily recommend Flow Brackets to others. 👍
KINGPIN NSW/SA Slimline Rear Number Plate Cover 372mm (w) x 107mm (h)
![Customer photo review of [QLD] Euro Slimline SL2- Number Plate Bracket](http://images.loox.io/uploads/2026/9/29/FHWo7S9jP_mid.jpg)
Fits perfectly and just finishes the new look on the Euro slimline plates.
I love the front delete plinth! It fits like a glove, was super easy to install, and looks great. Would definitely recommend it!
Bentley Bentayga 4V FL 2021-Current - OEM Plinth Delete Kit (FRONT)
The ordering and shipping were without a hitch. Every thing that I ordered arrived in quick time and I live in a regional North Queensland town. The installation was a breeze and the products speak for themselves - it looks amazing. My local Lexus dealer was very impressed and said it looks much better without the factory plinth!
Lexus NX350H/ 450H F-SPORT 2021-Current - Miniature Plinth (FRONT)
Really well made and fitted perfectly. Way better than the ugly factory item that the dealer has already installed. Sent them the photo and recommended they offer these to future Mustang buyers.
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/27/bTx4LhUai_mid.jpg)
Really well made, I’ve recommended it to the dealer.
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/22/PjjI3GtIi_mid.jpg)
Didn't want to drill holes in a personalised plate and I wasn't sure I would find the right bracket. With Ben's guidance, decided to give it a try and how was really surprised how easy it was! Mounting bracket on original mounts then screw the plate on and voila!
[NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket
Absolutely blown away by these! 🤩 My Flow Brackets number plate brackets arrived beautifully packaged in a gorgeous box, with the brackets safely secured in foam. You can immediately see the care and attention to detail that’s gone into the whole experience. The instructions were so easy to follow, with every detail clearly covered. And the fit… “fits like a glove” doesn’t even do them justice! 👌 They fit absolutely perfectly and have completely transformed the look of my plates. They now look like they were born with the car rather than added afterwards. 🔥 And I have to mention the fantastic communication. It was so personalised, friendly and genuinely top-notch from start to finish. You don’t always get that level of care these days, and it really stood out. Amazing product, amazing presentation, perfect fit and exceptional customer service. Couldn’t be happier! ❤️🔥 Highly recommend Flow Brackets — they absolutely nailed it!
Mercedes C-Class Pre-Facelift 2014-2017 AMG Line W205 / C205 - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)](http://images.loox.io/uploads/2026/9/18/MchZqjQnI_mid.jpg)
I had been searching high and low across the UK for a factory thick bracket delete kit for my specific model, and it was virtually impossible to find anywhere. Every local vendor and specialist shop came up completely empty. No one makes this specific product for my vehicle let alone at a price point that makes sense. Stumbling upon Flow Bracket over in Australia was a complete game changer. Finding a company on the other side of the world producing the exact niche solution I needed felt too good to be true. The whole transaction took place seamlessly over Instagram DMs and email. The team’s responsive service was second to none. They answered my questions right away, handled the international ordering details effortlessly, and made dealing with an overseas business feel completely effortless. Even with the distance, delivery to the UK took just a single week! The packaging was fantastic super secure, heavily protected, and arrived in pristine condition despite traveling halfway around the globe. When it comes to the product itself, the engineering quality is top tier. The sheer build strength and precision fitment are clearly the core of their USP. Thanks to how well engineered the kit is, I was able to cut the install time short and keep the fitting process surprisingly simple. It bolted straight up with zero fuss and completely transformed the setup. Flow Bracket is running a serious operation down in Australia. Finding this level of custom product support, lightning fast turnaround, and genuine product quality is rare. You guys genuinely need to push into and sell to the UK market even more because the car community over here needs this gear. Massive thanks to the team absolutely top notch work! Many Thanks from CT @Team_Roto
[QLD] Flexi Slimline F3-SL 3-4 Character - 291mm (w) x 100mm (h)
Looks great once installed. Super clean with numberplate cover. One very minor issue worth noting - I think my kit came with a pair of flat edge thread-cutting screws instead of the two pointed self-tapping screws as indicated in the manual. It made screwing the plinth delete plate quite a pain as I had to use a lot of force to catch the thread. Had to screw it in at an angle. All good once in. Could have been just my kit but perhaps worth checking the supplier has included the correct self tapping screws in this particular GR kit. Customer service was great.
![Customer photo review of [VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)](http://images.loox.io/uploads/2026/9/16/BYzGKP2Pp_mid.jpg)
Excellent fit. Enhanced the overall look of the roadster. Saved my paintwork! Happy 😊
[VIC/NSW/SA/TAS/WA/ACT] JDM Plate Bracket - 330mm (w) x 165mm (h)
Easy to fit and looks the part.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Na
![Customer photo review of [NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/15/KXChWDdDm_mid.jpg)
Na
[NSW] Rear SL3 Slimline 372mm (w) x 107mm (h) - Number Plate Bracket
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/14/CuSworr1z_mid.jpg)
Ready and easy to fit, tidy up front of vehicle and got rid of factory holder which was rattling anyway
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
![Customer photo review of [VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/9/13/W5WyvRlbn_mid.jpg)
Looks great fitted well
[VIC] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket](http://images.loox.io/uploads/2026/9/12/p8MIN7GWe_mid.jpg)
Great communication fast delivery 1st class packaging & presentation
[NSW] Front SL1 Slimline - 372mm (w) x 84mm - Number Plate Bracket
Didn’t think it was going to fit but it turned out fitting just right! I’m happy 🙂
KINGPIN NSW/SA Slimline Front Number Plate Cover 371-372mm (w) x 84mm (h)
Looks good. 👍🏼
Mercedes AMG GT63 Coupe C192 2024-Current - OEM Plinth Delete Kit (FRONT)
Great system to minimise the generic plastic plinth. Looks great. Easy to install. Quality precision parts. Quick postage and great packaging
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
Makes my Mustang look mean and clean
Excellent product. Fit exactly right. Highly recommended
Easy to install and nicely fit. My front grill nice and fully showing now.
Toyota AXAP64R RAV4 GR SPORT 2026-Current - OEM Plinth Delete Kit (FRONT)
![Customer photo review of [WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/30/ImcxOJ38X_mid.jpg)
A premium price, but an excellent quality product and supporting information overall. I did an OEM plinth delete and slimline plate install on my Mustang and a slimline plate install on my Raptor, which by design deletes the Ford OEM plinth. The kit comes with everything required for a seamless install and has dramatically changed the appearance of my cars. Highly recommended.
[WA] Slimline SL2 - 372mm (w) x 100mm (h) - Number Plate Bracket
![Customer photo review of [VIC] USA Plate - Number Plate Bracket](http://images.loox.io/uploads/2026/8/27/Mu3Zeq26n_mid.jpg)
Very simple I stall and everything fitting very easily. Makes my ride look really cool now after removing the awful factory fitted brackets.
Looks great
Lexus IS 300/ 300H/ 350/ 500 F-SPORT GEN 3 2020-2025 - Miniature Plinth (FRONT)
Made a huge difference, now the plate sits correctly, expensive but worth it
![Customer photo review of [NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/24/BkZc_CqRG_mid.jpg)
Floating bracket looks awesome. Highly recommend
[NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket
![Customer photo review of [NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket](http://images.loox.io/uploads/2026/8/24/0J9NA_c1O_mid.jpg)
Excellent fit. Highly recommend
[NSW] 3 or 4 Character Traditional Black 254mm (w) x 134mm (h) - Number Plate Bracket
Great customer service and support especially with my tailored requirements needing the items shipped to UAE
Mercedes CLE 53 AMG C236/A236 2025 - OEM Plinth Delete Kit (FRONT)
